Guided installation

Cage & Plenum Sentinel

One instruction at a time. Your progress is saved automatically.

Step 1 of 40%

Do this now

Flash the CSI mesh nodes

Flash each ESP32-S3 with the LatentField CSI firmware (ESPHome). The nodes broadcast to each other and stream Channel State Information over USB — this is the raw sense the Datacenter kit reads. Repeat for all 6 nodes and place them around the space.

Technician command

pip install esphome esphome run csi_node.yaml

I’m stuck on this step

Check power and cable connections first. Keep the device close to the setup phone or laptop.

Open the field troubleshooting guide