Guided installation
Machine Bay Watch
One instruction at a time. Your progress is saved automatically.
Step 1 of 40%
01
Do this now
Flash the CSI mesh nodes
Flash each ESP32-S3 with the LatentField CSI firmware (ESPHome). The nodes broadcast to each other and stream Channel State Information over USB — this is the raw sense the Industrial kit reads. Repeat for all 6 nodes and place them around the space.
Technician command
pip install esphome
esphome run csi_node.yaml
I’m stuck on this step
Check power and cable connections first. Keep the device close to the setup phone or laptop.
Open the field troubleshooting guide